Vous possédez un compte ?
Connectez-vous pour payer plus vite.
Heard a squeal?
It wasn't us.
Les freins se sentent, ils ne s'entendent pas. 2 paires (4 plaquettes) à partir de 69,99 $, livraison gratuite au Canada.
Magasinez vos plaquettesChoisissez votre frein. Plaquettes avant + arrière, prêtes à expédier.
Fits: XT M8120 / SLX M7120 / XTR M9120 / Saint / Zee + more
Fits: Code / Code Stealth / DB8 / G2 RE + more
Fits: SRAM Maven
Fits: Guide / G2 / Elixir Trail / X0 Trail + more
Longest wear and the strongest wet-weather grip in the lineup. Built for BC winters, e-bikes, and heavy riders. The loudest of the three.
FROM $69.99 · 2 PAIRS · FRONT + REAR
Near-identical feel to Trail with a longer service life. Give it a few extra rides to bed in and quiet down. Available with cooling fins for select models.
FROM $69.99 · 2 PAIRS · FRONT + REAR
Beds in fast and runs quietest from day one. Wears a little sooner than Gravity. Available with cooling fins for select models.
FROM $69.99 · 2 PAIRS · FRONT + REAR
I got these when the stock organic pads needed to get replaced. The performance of the pads has been great and the order process was very simple and efficient. Great local company and very well priced.
SRAM Code-R brakes with upgrade to Lewis 2.3mm 223mm rotors. I am very pleased with the results, my braking power and lever feel now come close to the Maven's on my sons bike and the much more expensive Hayes dominion upgrade my wife recently made......
I'm on a Forbidden dreadnaught, previously running 180mm x 1.85mm rotors on the rear (caliper mounted direct to frame) 200mm x 1.85mm rotors on the front (caliper mounted to 20mm adaptor bolted to my Fox 38 performance). The swap over to the 223mm x 2.3mm Lewis rotors was very smooth, purchased two Loam Goat 43mm adaptors and an extra pair of 6mm bolts (my rear bolts worked fine but my front bolts were too long), I had to be careful to set the rear adaptor as far outboard as possible before tightening down the mounting bolts. I bled the brakes at the same time and put in new pads. The pistons still had good clearance and the 2.3mm rotors fit like a dream, the bite point has moved outwards a small amount (which I really like) and the extra power on steep slabs and loam is a dream come true. My code Rs have contact (bite) point adjustment so if I didn't like the slightly outboard feel I could move it in, but I found it was perfect without any bite point adjustment.
They are nice and light and they do the job perfectly .
My brakes not only squeels like a pig every time but also takes a lot of effort to stop, and that's on an - XC bike. No matter what I do, clean thw pads with soap and water, alcohol etc, sanded and cleaned the rotors blah blah blah. Came across an ad on FB, sceptical but still ordered a pair and now a big WOW, it is night ang day. No noise and only 1 finger touch on the levers. No more embarassment.
Works great, and I love the personal touch added to the order! Happy to support a local business!
Stop my Rocky Mountain Fatbike on a dime. Very impressed.
They work well when modulation is key, also when I need to stop on a dime.
With all equipment and bike these brakes are stopping 300lbs.
So far, no issues with heat doing long 15–30-minute descents.
Bedding in the pads was quick and easy.
Will purchase again from Laom Goat when I need new pads.
Bought two 220mm rotors a couple of months ago for my Hayes Dominion A4s. I’ve ridden them in the Whistler Bike Park and done multiple long descents around the Sea2Sky with absolutely no issues. I’m around 200 lbs and ride almost every day, check out my IG @patrik_chomist for proof :)
They handle freeride and technical riding really well and can be super bitey with the right brake pad. The rotors are super powerful with the Trail compound LoamGoat brake pads.
The only downside would be the weight, which can easily be reduced by going with a 200mm or 180mm rotor.
I’d definitely buy them again. Hard to beat the price to performance ratio!
The all feel no squeal slogan is accurate! Just put them on and headed for the top of Mount 7 in Golden, BC and they held up top to bottom without any fade or squealing.
I can't express how happy I am. Just buy these if you need pads, don't mess around.
Customer for life. Instant upgrade. My bike feels like my bike again. Will never buy OEM ever again.
Thanks you!
great pad. great price
Quick delivery with very happy customers. A quality product!
Great little block, been using it for piston cleaning 2-3 times per week with the dry dusty conditions at the local bike park and it is a time saver compared to the other block I have berm using.
Great product, great price, no squeals, just smooth stops and easy handling
These pads work excellent with good stopping power. When I reached out on insta I got very fast help!
This store provides high-quality brake pads at excellent value with fast, reliable shipping and exceptional customer service. Customers praise the quick delivery, responsive communication, personal touches like handwritten notes, and products that match or exc...
Select your brake brand to see compatible pads
Not sure what brakes you have? Check the brand name stamped on your brake lever or caliper.
Proven on Cypress, Seymour, Squamish, and Whistler. If they can handle the wettest, steepest trails in BC, they can handle yours.
Same-day shipping from North Vancouver, Mon-Fri. Order before 12pm PT and get your pads ready for the weekend.
Not satisfied? We'll make it right. No questions asked. That's the Loam Goat promise.
Send us a photo of your brakes and we'll find the right pads in under 2 minutes.
Chat With Us
